|
|
Design of optical amplifier
Somora, Rastislav ; Číž, Radim (referee) ; Slavíček, Karel (advisor)
This Bachelor's thesis deals with design and construction of support circuits for a modern optical amplifier the SOA. In the first chapter, optical transmitting medium with its physical properties and types of used cabels is described. The overview includes a list of optical cables, their damping properties and parasitic effects which can occur durring comunication. Next chapter is focused on the optical signal sources used in modern data networks, describes their internal structure and physical essence. Third chapter is dedicated to designing the optical amplifier with the SOA circuit. It focuses on the right choice of parts, their arrangement and layout of the design. Last chapter deals with set up, calibration and control of the optical amplifier module.
|
|
|
Design of semiconductor optical amplifier
Somora, Rastislav ; Hanák, Pavel (referee) ; Slavíček, Karel (advisor)
Diploma thesis deals with the construction of a moder semiconductor optical amplifier SOA. In the first chapter optical comunication and the use of optical amplifiers is described. In the next chapter some types of optical fibers, their chemical composition and properties are described in detail. The third chapter overviews optical amplifiers, their use today, describes their advantages and disadvantages and their proper use in optical comunications. The fourth chapter describes the solution of the objective, the right layout of separate blocks and connections used in measurements. Fifth chapter describes used components, describes their basic parameters and proper use in circuit. The last chapter evaluates outputs of measurements and their impact on the objective.
|
|
|
Methods for searching and documenting optical cables
Havliš, Ondřej ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
The purpose of this bachelor thesis is a description of searching for optical cables with metallic elements and EMS markers below the earth surface by suitable method and the possibility of recording and documentation of optical cables in a geographic information system ArcGIS. In the beginning there is a mention of an optical cable in particular of its the most important part, which is an optical fiber. Further there is the purpose what the optical fiber in the telecommunications world of techniques was developed for. Then there are the various advantages of the optical fiber described. This project also deals with the various methods of searching the optical cables using metallic elements. It is a called Galvanic and Inductive method, which are used to search for the optical cable by using the enclosed metallic lines, which, with the proper connection to a receiver, generates electromagnetic fields around. Another way to search the fiber optic cable is realized by the EMS markers. There are various types of passive electronic tags described. These electronic passive tags are manufactured in different color, which is used for marking the various branches of networks. There is the possibility of documentation of the optical cables by using ArcGIS geographic system from ERSI mentioned in the project. There is its structure and func-tion of individual subprograms in detail described. In the chapter GSM there is an analysis of operating principle of the system. At the end of this thesis the laboratory task is suggested. It describes the searching for fiber optic cable and the other metallic circuits by passive markers and iD markers.
|
|
|
Computer Network Design
Bartoň, Jan ; Kavan, Jiří (referee) ; Ondrák, Viktor (advisor)
The goal of this thesis is to analyze the current state of the customer's computer network and his requirements. Then the changes and the way of their realization were proposed. The next part of the thesis are the description of appropriate components, selected technologies and the detailed description of the implementation process, including blueprints.
|
|
|
Assembly of optical cables - effect on fiber parameters
Zelinková, Vlasta ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
The aim of this paper is to describe the optical fiber manufacture, installation, utilization in practice and the parameters that affect its properties. The practical part was devoted to the creation of optical paths, the implementation of separate and subsequent measurement and evalution of the resulting values. Finally, the comparison is to measure fair values of laboratory measurements and tracks how much influence can have errors in the construction of optical lines to fiber parameters.
|
|
|
Basic methods of reflectometry
Kovář, Ondřej ; Hadinec, Michal (referee) ; Fiala, Pavel (advisor)
This bachelor thesis is focused on physical method called reflectometry and it deals with problem of detection faults in cables and its formatting. This thesis describe the posibility of aplication of this method to a coaxial or an optical cable. Theoretical part of this project is devided in two parts. First part is about a coaxial reflektometry and second part is about an optical reflectometry. Both methods are desribed by block diagrams and even by analysis of real machines. Due to modern devices, we are able to find out in very short time the cable lenght or if the cable is damaged. Because of this ability the reflectometer is very valuable and powerful tool and the research in this technical sector is intesive. Final part of this bachelor thesis inscribe the proposal of laboratorial work, which should introduce the reflectometry to other students.
|
|
| |
|
|
Optical Network Reconstruction Project Management
Dlapka, Jiří ; Ivo,, LUDVÍK (referee) ; Ondrák, Viktor (advisor)
The bachelor's thesis deals with the design of project management documentation for the project of construction of the optical network on Tetčická Street, Antonína Smutný to School Street, K Závorám and School Street. The technology used to build the optical network is currently state-of-the-art with sufficient bandwidth to transmit large amounts of data. The investor is the company TRIPLE SOLUTION s.r.o., which is also a supporter of this work. The thesis contains a design of construction, design of analyzes needed to create project management documentation and economic evaluation with a return on investment.
|
|
|
Search storage of fiber optic cables
Čučka, Milan ; Dostál, Otto (referee) ; Filka, Miloslav (advisor)
This work deals with the possibilities of laying and reverse lookup optical routes with the help of modern technology. Hereinafter, there are possibilities for documentation and registration of fiber optic lines. Speaking of thesis, it focuses on optical technology, advantages and disadvantages of this technology. Introduction focuses on fiber optic cable and related theoretical knowledge. Additionally, there are introduced comparisons with metallic lines. Another part is based on different searching methods for optical cables using metallic elements are analyzed in a detail. This section discusses galvanic and inductive methods. Subsequently, the thesis deals with searching for optical paths with the help of EMS (electronic marker system). Moreover, there are described individual types of electronic tags which are used in the installation of different kinds of lines. There are also briefly described seeker EMS markers, made by Dynatel. In addition to my work you can find the description of GPS (Global Positioning System) technology and routing the cable with the help of GPS system. Finally, possibility of documentation and evidence in the ArcGIS from ERSI and in the SPIDER-fiber from Gisoft is given. The overall functions of individual programs and their options are analyzed. The last section presents the implementation of laboratory tasks and programming burial markers, creating navigation in Urwigo and realisation with Openwing in Nokia phone. In the end of the work is map with markers positions.
|
|
|
Model of the metropolitan optical network
Prudík, Jiří ; Hudcová, Lucie (referee) ; Křivák, Petr (advisor)
The purpose of this master’s thesis is foremost to provide a simple guide how to build elements of optical metropolitan area network. The basic model consists to sequence of construction, network topology, passive and active parts. The collection contains examples of alternative technology such as Wireless LAN with different frequency. The optical network construction based on optical cable, fibres, splices, trays, adapters, connectors and active parts for example a lot of media convertor models. After that there are demonstrating type of wavelength division multiplexer used in metropolitan area network – passive planar PCL splitter. One of the passive planar splitter are used to increase optical fibre channel. At the end of the collection a simplified examples of used measurements – optical time domain reflectometry and optical fibre transmission. Contains standard protocols or reflectogram. The conclusion of this thesis summarizes costs of FTTb (Fibre To The Building) model of optical metropolitan area network in Czech republic and future contribution for society.
|
guest ::
